Select the technical product descriptions you wish to receive and fill the form attached. They will be sent to you immediately.

Communication

VI-AL : Assembly line
This modular line is designed for the automatic assembly, inspection and packaging of mobile phone half cases.

Pdf file : 107.598 Ko

VI-LMA : Line for manual assembly and automated inspection
This line designed for the manual assembly of different products and for their inspection in automatic.

Pdf file : 58.202 Ko

VI-CCEC : Cut and check electronic cards
This machine is designed to cut (edge trimming, punching, ...), check (digital, radio-frequency, ...), download software and pack electronic cards.

Pdf file : 157.68 Ko

VI-M PAC : Modular assembly work station
The M PAC is designed for automatic assembly, inspection and pacaging of mechanical, electromechanical assemblies,... It is also designed to enable fast change-over of production runs.

Pdf file : 98.24 Ko

VI-ED400 : Stacker/unstacker for trays and platters
This modular line is designed for the automatic assembly, inspection and packaging of mobile phone half cases

Pdf file : 80.081 Ko

VI-PSAM : Plasma screen assembly machine
This machine is designed to the accurate positioning and the assembly, thanks to clamps, of two glass panels forming the plasma screens.

Pdf file : 46.595 Ko

VI-EWPM : Electronic wire preparation machine
The machine for the preparation of flat cables enables automatic transformation of electric wires packed in rolls into wires which are straightened, punched, stripped, cut to length and optionally, fitted of the connectors.

Pdf file : 47.97 Ko

VI-MBS : Machine for blade stamping and bending
This machine enables automatic reeling, straightening, stamping, bending, folding and cutting to length of thin metal blades, flats and strips.

Pdf file : 39.343 Ko

VI-WM : Winding Machine
This machine enables the automatic manufacturing and inspection of thermo adhesive copper coils of deflectors for cathodic tubes.

Pdf file : 54.93 Ko

Medical

VI-CMM : High performance continuous motion machine
The continuous motion enables for the assembly of parts at a very high work-rate (up to 1,000 parts minute). It may also be used for inspection, crimping, silicone application, etc...

Pdf file : 83.028 Ko

VI-BSL 250 : Body Sleeve Application Line
The body-sleeve application line enables the housing of complex shaped containers or bottles with printed films by means of shrink body-sleeves.

Pdf file : 114.155 Ko

VI-ED400 : Stacker/unstacker for trays and platters
This modular line is designed for the automatic assembly, inspection and packaging of mobile phone half cases

Pdf file : 80.081 Ko

VI-M PAC : Modular assembly work station
The M PAC is designed for automatic assembly, inspection and pacaging of mechanical, electromechanical assemblies,... It is also designed to enable fast change-over of production runs.

Pdf file : 98.24 Ko

VI-PIM : Plug Insert Machine
This machine enables automatic control, positioning and insertion of plugs on one side or two sides of tower rolls.

Pdf file : 46.153 Ko

VI-CMT : High performance continuous motion tuber
The continuous motion enables cutting tubes and inserting them into pumps or valves up to 500 p/min.

Pdf file : 90.104 Ko

Energy

VI-BC : Roebel Machine
This machine is designed to manufacture copper bars used in electric generators. It consists of a VI-STM unit (unrolling, stripping and cutting unit) with shaping presses and their manipulators.

Pdf file : 102.095 Ko

VI-DU : De-rolling unit
The VI-DU de-roller is designed to de-roll, wire, flat copper, tape, hollw wire to supply industrial machines suc as the VI-STM stripping machine.

Pdf file : 103.59 Ko

VI-STM : Stripping machine
The type VI-STM stripping machine is used to straighten, to strip ends and to cut wire, flat copper, tape, pipe...

Pdf file : 97.868 Ko

VI-LMC : Loop Manufacturing Center
The VI-LMC is designed to manufacture loops for traction and high-voltage motors from insulated flat copper wire.

Pdf file : 95.604 Ko

VI-CFM : Coil Forming Machines
This machine is used to form and shape basic copper loops or pins into finished coils. These coils are then installed in the rotor or stator slots of AC or DC (for lap type coils) generators or motors.

Pdf file : 89.413 Ko

VI-PCFM : Pneumatic Coil Forming Machine
This machine is used to form and shape basic copper loops or pins into finished coils. These coils are then installed in the rotor or stator slots of AC or DC (for lap type coils) generators or motors.

Pdf file : 87.908 Ko

VI-HBFM : Hydro Bars Forming Machine
The VI-HBFM is used to shape basic straight bars into formed bars. These formed bars are then installed in the stator slots of hydro generators.

Pdf file : 89.738 Ko

Please complete this form to request your downloads (Fields in bold are required)

Company

Country

Title

First Name

Last Name

E-mail

City

Phone

Address

Postal code

Project description